Wednesday, February 23, 2011

Scraping the crud off the ceilings

 

Our first project in the bedroom makeover was to take all the lovely 1980’s popcorn off the ceiling. As a designer, popcorn is one of my pet peeves. I hate it.

Luckily, Mom has a lot of experience getting this stuff off the ceiling.

DSCN1190

You  need:

DSCN1195 A Spray bottle filled with really hot water

and a scraper of some sort. I prefer the 8” taping knife.

 

 

 

 

 

 

 

 

The texture is going to get everywhere, so protect the furniture and floor with drop cloths.

Spray a portion liberally with hot water, then scrape the texture off.

DSCN1197 (2)

I found long smooth strokes work best, with the knife at an angle. If you have a stubborn spot, spray with more hot water, and let it sit for a minute before scraping at it again.

It’s not easy work, but it is easier than putting up new drywall.   A lot of times the texture is never painted, so it comes right off.

DSCN1199

Once all the texture is off, you will need to fill any cracks or imperfections with a coat of drywall joint compound, let dry, then sand smooth.

I had a few places the texture had been patched I couldn’t get out, so I just put compound over them to feather it out.

Once sanded and pretty, you’re ready to paint!

1 comment:

  1. Ok, So I'm so ready to see the finished product! Post please! =) Happy Friday!

    ReplyDelete

Got something to say? Let me know what you think!

LinkWithin

Related Posts with Thumbnails